68
3
Award BIOS Setup Utility
Wake Up Events
Move the cursor to this field and press <Enter>. The following fields
will appear.
PS2KB Wakeup Select
This field allows you to set password or hot key function for the
PS/2 keyboard to wake up the system.
PS2KB Wakeup from S3/S4/S5
This field allows you to select a suspend mode to enable a PS/2
keyboard to wake up the system.
PS2MS Wakeup from S3/S4/S5
This field allows you to select a suspend mode to enable a PS/2
mouse click to wake up the system.
USB Resume from S3
This field, when enabled, allows you to use a USB device to
wake up the system.
PowerOn by PCI Card
This field should be set to Enabled only if your PCI card such as
LAN card or modem card uses the PCI PME (Power
Management Event) signal to remotely wake up the PC. Refer to
the cards documentation for more information.
Resume On LAN/Ring
This field supports two functions.
When enabled, the system will power-on to respond to calls
coming through an external or internal modem. Refer to Wake-
On-Ring Connector in chapter 2 for more information.
When enabled, the LAN card in the system will allow the
network to power-on a Soft Power Down (Soft-Off) PC.
However, if your system is in the Suspend mode, you can wake
up the system only through an IRQ or DMA interrupt. Your
LAN card must support the remote wake up function. Refer
to Wake-On-LAN Connector in chapter 2 for more informa-
tion.
