74
Addendum
586ITB
Rev. AA+
Chipset Features Setup
: Enabled
: Normal
: 11/7/4
: x444/x444
: x444
: Disabled
: 5 Clks
: 3
: 4 Clks
: Enabled
: 2 Clks
: 3/3
: Disabled
: Disabled
: 4
: 2
: Disabled
: Disabled
: Disabled
: Enabled
: 16mA/16mA
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Auto Configuration
DRAM Timing
DRAM Leadoff Timing
DRAM Read Burst (EDO/FP)
DRAM Write Burst Timing
Fast EDO Lead Off
Refresh RAS# Assertion
Fast RAS To CAS Delay
DRAM Page Idle Timer
DRAM Enhanced Paging
Fast MA to RAS# Delay
SDRAM (CAS Lat/RAS-to-CAS)
System BIOS Cacheable
Video BIOS Cacheable
8 Bit I/O Recovery Time
16 Bit I/O Recovery Time
Memory Hole At 15M-16M
Extented CPU-PIIX4 PHLDA#
Host-to-PCI Bridge Retry
PCI Concurrency
Mem. Drive Str. (MA/RAS)
↑ ↓ → ←
ESC
F1
F5
F6
F7
: Quit
: Help
: Old Values
: Load Fail-Safe Settings
: Load Optimal Settings
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color
“Power-Supply Type” has been added into the Chipset Features Setup.
The default is “AT” (for an AT power supply). If you are using an AT
power supply and you set this field to “ATX”, hardware reset will not
function properly.
If you are using an ATX power supply, make sure to set this field to
ATX. If you set this to “AT”, you will not be able to power off (Soft Off)
your system under Windows
95 operating system.
: AT
Power-Supply Type
Jumper Settings for Intel
and AMD
Processors
JP14 has been included as one of the jumpers that must be set when
upgrading an Intel
or AMD
processor. Refer to the next page for the
updated jumper settings.
Please ignore JP14 in the “Factory Testing Jumpers” section of the
manual.
Содержание 586TXD
Страница 1: ...586TXD Rev A SystemBoard User sManual S33870612...
Страница 12: ...12 BoardLayout square denotes pin 1...
