Dexter Power A7188-DP-1, Юридические и техника безопасности инструкции

Страница: 26 / 30

4. BEFORE USE
• Always check that the supply voltage is the same as the voltage indicated on the nameplate of the
tool (tools with a rating of 230V or 240V can also be connected to a 220V supply)
• Always mount auxiliary handle; never use the tool without it
• Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory
diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device
when connectable.
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in
conjunction with additives for wood conditioning; wear a dust mask and work with a dust
extraction device when connectable
• Follow the dust-related national requirements for the materials you want to work with
• Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more
securely than by hand)
• Do not clamp the tool in a vice.
When working, always hold the tool fi¬rmly with both hands and take a secure stance
• Always keep the cord away from moving parts of the tool; direct the cord to the rear, away from
the tool
• If the cord is damaged or cut through while working, do not touch the cord, but immediately
disconnect the plug
• Never use the tool when cord is damaged; have it replaced by a qualified person
• In case of electrical or mechanical malfunction, immediately switch off the tool and disconnect
the plug
• In case of current interruption or when the plug is accidentally pulled out, release switch in order
to prevent uncontrolled restarting
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed!
EN
24
5. OPERATION