Dexter Power A7188-DP-1, Юридические и техника безопасности инструкции

Страница: 23 / 30

21
EN
1. SAFETY INSTRUCTIONS
d) Use special care when working corners, sharp edges etc. Avoid bouncing and
snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the
rotating accessory and cause loss of control or kickback.
e)
Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create
frequent kickback and loss of control.
Additional safety instructions for polishing operations
a) Do not allow any loose portion of the polishing bonnet or its attachment strings to
spin freely. Tuck away or trim any loose attachment strings. Loose and spinning
attachment strings can entangle your fingers or snag on the workpiece.
EXTRA SAFETY REGULATIONS CONCERNING POLISHER
1.Wear ear protectors with this polisher. Exposure to noise can cause hearing loss.
2. Check that speed marked on the wheel is equal to or greater than the rated speed of the polisher.
3. Inspect the sponge pad before use. Do not use chipped, cracked or otherwise defective products.
4. Ensure that the bonnets are fitted in accordance with the manufacturer’s instructions.
5. Ensure that the bonnet is correctly mounted and tightened before use and run the tool at no-load
for 30 seconds in a safe position. Stop immediately if there is considerable vibration or if other
defects are detected. If this condition occurs, check the machine to determine the cause.
6. Ensure that sparks resulting from use do not create a hazard e.g. do not hit persons, or ignite
flammable substances.
7. For cleaning, personal protective equipment such as gloves and apron should be worn.
8. The wheel continues to rotate after the tool is switched off. And it will stop soon.
9. Do not use the polisher as a fixed tool.
The tool must be used only for its prescribed purpose. Any use other than those mentioned in this
Manual will be considered a case of misuse. The user and not the manufacturer shall be liable for
any damage or injury resulting from such cases of misuse. To use this tool properly, you must
observe the safety regulations, the assembly instructions and the operating instructions to be found
in this Manual. All persons who use and service the machine have to be acquainted with this Manual
and must be informed about its potential hazards. Children and frail people must not use this tool.