Dexter Laundry HIGH SPEED 25LB WASHER, Инструкция по установке и эксплуатации

Страница: 7 / 14

STARTING THE WASHER
A. Load the clothes into the cylinder and latch the door securely. Be sure clothing does not
get caught between the door gasket and tub front when closing the door. Do not overload the
washer.
B. Select the appropriate cycle number (1 through 6) using for the load being washed. See
the cycle descriptions in the programming section. Use the UP and DOWN keys to change
the cycle number.
C. If not using a chemical injection system, add low-sudsing powdered detergent into the
“detergent” compartment of the automatic dispenser on the top of the washer. If desired add
fabric softener to the “fabric softener” compartment. Use the amount of fabric softener as
recommended by the manufacturer.
If liquid wash products are used in the “detergent” compartment, they must be added at
the beginning of the wash cycle.
If the machine is set for pre-wash, washing products can be added to the round opening of
the dispenser or put in with the clothes when loading the cylinder before starting the
machine.
D. Press START. The display will go blank for a moment and then display the cycle time in
minutes. The clothes door will lock and remain locked until the end of the cycle.
END OF CYCLE
When the cycle is complete the “on” light will go off. The door can now be opened and the clothes
load removed. Leave the clothes door open when the machine is not in use.
SAFETY DOOR LOCK
This machine is equipped with a Safety Door Lock that prevents opening the door if the power is
interrupted, until it is safe to do so.
If power failure occurs or if power is interrupted during maintenance it will be necessary to wait 2 to
3 minutes before the door can be opened.