Dexter Laundry DSC, Руководство по эксплуатации, техническому обслуживанию и ремонту

Страница: 20 / 30

-19-
Status Light and Troubleshooting
Mount the Status Light Module in a location on the front of the
trailer where the light is easily seen.
Light Action Condition Corrective Action
Solid GREEN
pulsing Normal operation –
no system faults No action – system ok.
1 GREEN flash Module reset to
manufacturers
default values. Keep
trailer sitting still
for minimum 30
seconds, then drive
normally. If module does not
return to normal solid
GREEN pulsing light
after three system
restarts, have the unit
checked at a service
center.
RED, GREEN.
RED, GREEN,
continuing... Rough terrain
mode. No action – system
will momentarily
return to normal
function.
No light Unit in “sleep”
mode. Activate manual
override on the brake
controller to “wake up”
unit.
No light No power after
“wake up” from
brake controller. Verify the unit has
good quality power,
ground and brake
controller wire
connections. Check
for any blown fuses
on the truck and
trailer.
No light Over voltage – over
+20 volts. Check that power
source is not
exceeding 20 volts.
Correct voltage to
12-15 volts.
Status Light and Troubleshooting