Dexter Laundry 3276007357349, Инструкция по эксплуатации

Страница: 122 / 148

122
WARNING ! Pull out the power plug before assembling, adjusting
and changing the cutting wheel.
IMPORTANT ! To guarantee proper operation, the cooling water
hose must not be kinked during installation. Frequently inspect
hoses and other critical parts which could be deteriorated by
water and the pressure of the water supply.
CAUTION ! Ensure that the cable and the cooling water hose
cannot get into the cutting area.
5. BEFORE STARTING THE EQUIPMENT
ust be securely screwed to a work bench,
to the provided base frame, or similar. Before setting up the machine, choose a stable surface, that is
free of obstacles (except materials to be cut) and adequately lit.
the equipment is switched on.
• The cutting wheel must rotate smoothly.
• Check that the voltage on the rating plate is the same as your supply voltage before you connect the
equipment to the power supply.
• Always stand on the front of the machine (close to the transport handle) when operating.
7. OPERATION
ON/OFF SWITCH
WARNING!
Before starting:
• Ensure that there are no visible defects.
• Ensure that there is nothing in the work area that may hamper the work to be performed.
• Ensure that there is sufficient cooling water.
6. ASSEMBLY
UNFOLDING THE BASE FRAME
• To set up the equipment on its feet, press the latching button and lower the feet until they latch in the
intended position. To fold up the feet, proceed in reverse order.
FITTING THE COOLING WATER PUMP
• Place the cooling water pump - with the suction cups pointing down - into the container.
• Then fasten the hose to the intended positions.
FITTING THE TRANSPORT AIDS
• Fit the transport wheels, the parking foot and the transport handle.
FITTING THE STOP RAIL AND THE ANGLE STOP
• First push the stop rail onto the guides as shown and fasten. CAUTION! Do not position the stop rail in
line with the cutting wheel line or else it could be cut during operation.
• You can then push the angle stop into the guide and fasten in any position.
FR
ES
PT
IT
EL
PL
UA
RO
EN