Dexter Laundry 220MFS2.5, Инструкция по эксплуатации

Страница: 174 / 188

NOTE:Check that the mains voltage matches the rated voltage on the type plate before
connecting the tool to the mains.
1.
2.
1.
2.
3.
Release the dust collector from the tool.
Put the adapter in the tool.
Turn the adapter clockwise to fasten it.
Connect the dust extractor to the adapter.
Start the tool by pressing the power switch.
For continuous operation, press the lock button when the power switch is pressed.
Switch off the tool by pressing in and then releasing the power switch.
1.
2.
3.
4.
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION
6. OPERATION
174
The tool can be used with the dust collector or dust extractor. To use a dust extractor, do as
follows:
Dust extraction
STARTING/STOPPING
Place the tool with the full surface of the sandpaper against the surface to be sanded.
Apply an even pressure during the work. Pressing harder will not speed up the work, but
will put more strain on the tool and the sandpaper instead.
The sanding rate and pattern mainly depend on the coarseness of the sandpaper, the
speed of the pad, and the pressure.
SANDING
Use coarse sandpaper. Press lightly for best results.
COARSE SANDING
NOTE: Always lift the sander from the work before switching on or switch off.
WARNING. Do not use the dust extraction box when sanding metal.
The hot metal particles could cause residual wood dust or the box
itself to catch fire.