DIMAX804KC User’s Manual
DEXON Systems
7
Remote Control
This menu item contains the parameters of remote control:
•
DHCP enable
•
Specify IP address
•
Set network mask
You should press the SET button to save the settings.
OSD
There is a built-in information text about the current output settings and input connections. This
information text can be visualized on the
OSD
(
O
n
S
creen
D
isplay) panel. The visibility settings
of the OSD panel can be changed here.
•
Auto
: the information panel is automatically displayed in case of any changes in the
settings.
•
Yes
: the information panel is visualized permanently.
•
No
: the information panel is not visible.
By default, the information panel can be seen on the top-left corner of each display output. The
display time in case of Auto mode is 4 seconds. These parameters can be changed from the
controlling application.
Serial Port
The adjustable parameters are: Baud Rate, Databits, Parity, Stopbits and Flow Control.
Factory Reset
The factory reset is a full restore of device to its factory settings.
3.1.2
Layouts
Layout is a set of parameters describing arrangement of the input signals on the DIMAX device.
The layout determines:
•
Input video and audio signals
•
Outputs assigned to that inputs
•
Input and output cropping values
•
Picture-in-picture signals and positions
The
Layouts
menu contains the list of available layouts. There are the very same three items
inside each layout submenu:
o
Layouts
▪
Layout #1
•
Store
•
Recall
•
Clear
▪
Layout #2
•
Store
•
Recall
•
Clear
▪
...
▪
Layout #32
•
Store
