NDS3228A 8 in 1 MPEG-2 H.264 SD
Encoder User’s Manual
39 / 55
User can decide to bypass the inputting PID as needed in this interface.
In some occasions, there are some PIDs which won’t belong to any program, such as EPG, NIT
tables, and so on, but user just wants to pass them through the multiplexing module without
changing anything. This is the main purpose of this function.
The display will show as below when user clicks ―Add‖ button.
Input PID and Output PID
The Old (Input) PID is the PID number in the TS from given Port. The correspondent New
(output) PID number could be same as input PID number while it could be different if a PID
remapping is needed.
Modify the data as needed and click OK to confirm. The PID then will be bypassed and listed
in the table as below.
