NDS3228A 8 in 1 MPEG-2 H.264 SD
Encoder User’s Manual
35 / 55
IP Output Enable
Check the checkbox with ―√‖, then the IP output is enabled, otherwise it is not. Users can
decide whether to open the IP output function or not.Users can modify the IP address here as
well.
IP Out Address/Output Port
Users can set the service IP and the TS output address by modifying the value in these two
fields.
Original Network ID
This 16-bit field gives the label identifying the network ID of the originating delivery system.
The value ranges from 0 to 0xFFFF.
Transport Stream ID
This is a 16-bit field which serves as a label for identification of this TS from any other
multiplex within the delivery system. The value ranges from 0 to 0xFFFF.
MPTS Filter Null Packet
If this function is effected, then the null packets in IP output stream will be filtered.
Users can
set
the
PIDs and
Program
number in
these
areas.
