NDS3228A 8 in 1 MPEG-2 H.264 SD
Encoder User’s Manual
19 / 55
3.2.1.4 Program Mux Setting
Users can decide whether to open the multiplexing function of the device.
Channel Mux
Under this interface, users can decide whether to multiplexer the channel encoding stream.
YES
means that the device multiplexes the encoding stream into the MPTS, while
NO
means that the
output program is SPTS. The LCD will display the following pages after pressing enter key.
1.1.4.1 Channel Mux 01/01
[ YES] NO
3.2.2 ASI Setting
Users can check the ASI input program amount in this interface, and the LCD will display the
following page. Prog: 006 represents the input program is 6 and Out:003 represents 3 of the 6
programs have been multiplexed.
► 2.1 Parse ASI Prog
3.2.3 Output Setting
By press the enter key in the main editing interface, use can set the device output parameter.
The device will display the following page after users pressing the enter key.
2.1 Parse ASI Prog Prog: 006 Out: 003
►
001 HK1
√
002 HK2
X
► 3.1 IP Out Enable 3.2 IP Out Address
3.3 IP Out Port 3.4 Trans Stream ID
► 3.5 Output Stream 3.6 Output Mode
3.7 ASI Output 3.8 UTC Time Config
► 3.9 Null PKT
