DewStop Breeze Easy Скачать руководство пользователя страница 18

17

Manual On/Off: 

Press the FAN ON/OFF button once to manually turn fan on, and 

again to turn fan off.

Countdown Timer: 

When the fan is turned on manually, the 

countdown timer will run your fan for your selected period of 

time, then turn your fan off.

Condensation Sensitivity: 

The minus sign is low condensation 

(humidity) sensitivity and the plus sign is high sensitivity; the dial 

can be set anywhere in between. In a very wet environment, 

lower sensitivity may be needed to avoid excessive fan run-time. 

In a very dry environment, higher sensitivity may be needed for 

the sensor to detect condensation. When the CONDENSATION 

SENSOR senses condensation, the BLUE LED LIGHT will pulse 

slowly. 

Setting Sensitivity:

 The dial is similar to a clock. The factory setting of the 

condensation (humidity) sensitivity dial is set to the noon position. If you feel the 

factory setting is too slow in turning on your fan, turn the dial to the right an hour at 

a time. Or, if you feel the factory setting turns your fan on too quickly, turn the dial to 

the left an hour at a time until the desired sensitivity level is reached.

Testing The Control

1.) After you have completely installed the CONTROL, you can turn on the breaker 

to apply power. 

WARNING:

 If the breaker trips or the fuse blows, 

Stop

 and call a qualified 

licensed electrician to investigate the problem. Turn the breaker off until the 

problem has been corrected.

2.) Press the FAN ON/OFF button to see the fan turn on, press the button again to 

see the fan turn off. 

3.) With the fan off, you can test the CONDENSATION SENSOR by blowing into 

the sensor as if you were blowing on a mirror to steam it. Use three puffs of breath 

and the fan will come on automatically. The BLUE LED LIGHT will pulse slowly; this 

shows you the CONTROL is sensing condensation.

4.) Sensor Shut-Off: To turn off the sensor and make the control just a manually 

activated adjustable timer, hold down the FAN ON/OFF button for 15 seconds. To 

enable the sensor again, simply repeat the process.

TIMER / MINUTERIE

SENSIBILITÉ

SENSITIVITY

Содержание Breeze Easy























Отзывы: