11
Installing the Fan from
Above the Ceiling
2.) From the roomside, place provided sheetrock cutout TEMPLATE on ceiling
where you wish the fan to be (DAMPER and electrical positions shown on
TEMPLATE). Mark around the edge of the TEMPLATE. Remove TEMPLATE, then
cut access opening along the line.
WARNING:
Disconnect all AC Power Breakers or Fuses before attempting
to cut into your ceiling.
1.) Attach conduit with wiring from CONTROL to HOUSING. Open the electrical
enclosure inside the fan HOUSING and connect wiring using the provided WIRE
NUTS, matching wire colours as shown:
WARNING:
Disconnect the AC power before any work is done to any part of
the circuit Breeze Easy is connected to. If you do not understand this
warning, seek the services of a qualified licensed electrician.
WARNING:
Copper to copper only. Do
not
use aluminum wire.
WARNING:
Follow all local electrical and safety codes, and NEC (National
Electrical Codes).
CAUTION:
If your house wires do not match these colors, determine what
each house wire represents before connecting. You may need to consult a
licensed electrician to determine this safely.
black / back
white / white
green / green / yellow
conduit (power
from CONTROL)
HOUSING
Mark around edge of
TEMPLATE with pencil.
WIRE
NUT
Qty:3
