DS-CAM-600
Technical data
2.2 Connections
2.2.1 Connectors and pinout
On the backside of the camera there are two connectors. For the trigger input there is a 4 pin Lemo 00 (called “IO
connector”), for the data transfer an Ethernet connector. The pinout of the Ethernet connector is according to the
standard.
Illustration 2: Connectors
Illustration 3: IO connector pinout
Note that pins 3 and 4 are used for clocking the camera. Pins 1 and 2 are reserved for synching multiple DEWESoft
instruments!
Document-Version: 1.0.0
www.dewesoft.com
Page 4/17
DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™
measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation