DS-CAM-600
3Installation
4. To enable the camera in Dewesoft copy the file GigECamera.cdv into the Dewesoft Addons
folder, usually located in Dewesoft7\Bin\V7_1\Addons
5. Copy and replace your existing DEWESoft.exe with the one downloaded.
6. Start DEWESoft and go to Settings > Hardware setup > Analog. For triggered mode
(DEWESoft is clocking the camera), check if your device (such as DEWE-43 for example)
is set to Standalone or Master:
Illustration 10: Dewesoft > Settings > Hardware setup > Analog: Set device to
Master or Standalone
7. Go to the Video tab and check »GigE Vision« and »Use trigger«.
Illustration 11: DEWESoft: Hardware setup > Video: finds GigE camera(s).
Page 11/17
www.dewesoft.com
Document-Version: 1.0.0
Disable online
compression
Set compression
after
measurement
DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™ DEWESoft™
measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation measurement innovation
