SIRIUSi-XHS®
TECHNICAL REFERENCE MANUAL
5.1.4. Generating A2L file
❺
When you are done with the previous steps you can export all XCP slave settings to A2L file,
by clicking the Generate A2L button. If you modified any of the settings you will be prompted to rebuild
and upload
XCP
settings
to the device
. It’s important that you click yes.
Image 57: Rebuild and upload warning
5.1.5. Download and Upload button
❻
When you properly set the settings you can press the Upload button, which will upload all the settings
directly to the device. An additional Download button is added, that can “Read” the settings directly
from the device, once they are properly uploaded.
5.2. Start the XCP protocol
When all the settings are set the device needs to be put in the RT mode, for that you need to press
START button
❼
. After start you can connect to XCP slave via XCP master (e.g. Dewesoft, Canape). If you
want to start all the RT devices at once press the Start all button
❽
.
There is also an additional option Restart acquisition on device startup , for setting the device directly
to RT-mode right away the device is reconnected back to power supply. For this option to work properly,
the device needs to be in the RT mode when unplugged from the power supply.
Image 58: Restart acquisition on device startup
SIRIUSi-XHS® - V21-2
45/52
