System DD11 / System DD21
Operating the control keypads
82774 2.0
63
8.8.2 Advanced functions
Saving a position
Any table position can be saved using this function.
When the controller is turned on for the first time, all positions are equal to the minimum table po-
sition (the lower end position).
Only one table position can be stored per memory key.
To save a position, proceed as follows:
1
Move the table to the position that you want to save.
The position is shown on the display (e.g. 125 cm).
2
Press the Save key.
5 -
S-
is now shown on the display.
3
Press the desired memory key (e.g. 2).
5 2
S 2
is shown on the display.
4
The set table position is now saved for the selected memory key.
A double-click noise can then be heard. After about 2 seconds, the saved table
position is displayed.
Adjusting the table to a saved height position
This function allows you to set the table to a saved table position.
1
Press and hold the memory key that corresponds to the desired table position
(e.g. position 2).
The table will move as long as the memory key is pressed. If you release this
key before the saved position is reached, the table will stop before it reaches this
position.
2
Release the key when the table has reached the saved position.
The current (saved) position is shown on the display.
