Dewert User Manual 6000E and 6800E – Updated 05.2021/1 MDR Page 7 of 15
Lowerable side guard, for side rail (optional)
This side guard can be placed and fixed on any side rail using a clamp. By loosening the toggle screw of the
clamp, the position and height of the inserted side guard can be shifted and adjusted respectively.
Complete lowering below the upholstery level can only be achieved if the guide points in the direction of the
upholstery when the side guard is inserted into the clamp.
Please note:
Never use the side guard as a push handle. It has not been designed for this purpose.
2.7 Special features of model 6100E
The telescopic column of the table is attached directly underneath the foot end of the table.
The upholstery support is a thick tubular steel frame which enables use without crossbars. This creates a free
area between the end of the frame (end of lying part/beginning of head part) and the telescopic column.
Here, a C-arm examination can be performed vertically in the chest to pelvis area of the lying patient.
Optionally, the table can be equipped with an HPL support plate and removable upholstery. The upholstery is
attached to the frame using hook-and-loop tape on the sides. To do this, affix the tape on the underside of the
frame. The upholstery can be removed fully.
3. Additional accessories (for user-specific table configuration, model dependent)
•
Individually lockable castors Ø 100 mm
•
Twin castors Ø 100 mm, centrally lockable
•
Wheel-lifting/fixing mechanism
•
Paper roll holder
•
Lateral armrest
•
Additional foot switch for low-voltage control
•
Additional hand switch for low-voltage control
•
DIN rails (stainless steel, 350 mm in length)
•
DIN rail ac
cessories, e.g. fastening clamps, side guards, infusion poles…
and more
4. Technical data
4.1 Individual models
Models
6000E
6050E
6070E
6075E
6001E
6051E
6870E
6875E
6805E
6810E
Max. length (mm)
1950
1950
2040
2040
Width (mm)
700/800
700/800
700
700
Min.
– max. height (mm)
560 - 960
560 - 960
560 - 960
560 - 960
Adjustment time (motor) (s)
24
24
24
24
Adjustment time, inclined
position (motor) (s)
/
20
/
20
Weight (approx., depending on
equipment) kg
80/85
100
110
120
Head part adjustment range
+45° / -35°
+70° / -25
+35° / -30°
+35° / -30°
3-sectioned head part adjustment
range (option)
+45° / -35°
/
+35° / -20°
+35° / -20°
Back part adjustment range
/
/
+70° / -15°
+70° / -15°
Leg part adjustment range
/
/
+50° / -55°
+50° / -55°
Adjustment range, inclined
position
/
0° / +25°
/
0° / +12°
Max. patient weight (kg)
250
250
220*
220*
