DeWalt XR Li-Ion DCD710-XE, Инструкция по эксплуатации

Страница: 9 / 16

7
Storage Recommendations
1. The best storage place is one that is cool and dry away from direct sunlight and
excess heat or cold.
2. For long storage, it is recommended to store a fully charged battery pack in a
cool dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge. The battery
pack will need to be recharged before use.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
J
I
FIG. 2
B
A
F
D
H
G
E
C
DCD710-XE
COMPONENTS (Fig. 2)
WARNING: Never modify the tool or any part of it. Damage or personal injury
could result.
A. Variable speed trigger switch G. Battery release button
B. Forward/reverse button H. Battery pack
C. Worklight I. Belt hook (optional accessory)
D. Torque adjustment collar J. Belt hook screw
E. Gear shifter
F.
Keyless chuck
INTENDED USE
This drill/driver is designed for light fastening and drilling applications.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This drill/driver is a professional power tool. DO NOT let children come into contact
with the tool. Supervision is required when inexperienced operators use this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, place the forward/
reverse button in the lock-off position or turn tool off and disconnect battery pack
before making any adjustments or removing/installing attachments or accessories.
Belt Hook (Optional Accessory)
WARNING: To reduce the risk of serious personal injury, place the forward/
reverse button in the lock-off position or turn tool off and disconnect battery pack
before making any adjustments or removing/installing attachments or accessories.
WARNING: To reduce the risk of serious personal injury, DO NOT suspend tool
overhead or suspend objects from the belt hook. ONLY hang tool’s belt hook from
a work belt.
WARNING: To reduce the risk of serious personal injury, ensure the screw
holding the belt hook is secure.
IMPORTANT:
When attaching or replacing the belt hook, use only the screw (J) that is
provided. Be sure to securely tighten screw.
The belt hook (I) can be be attached to either side of the tool using only the screw (J)
provided, to accommodate left- or right- handed users. If the hook is not desired at
all, it can be removed from the tool.
To move belt hook, remove the screw (J) that holds the belt hook in place then
reassemble on the opposite side. Be sure to securely tighten screw.