background image

Voice Activated Transmit (VOX)

In 

VOX

 mode, your radio can be used “hands-free,” automatically transmitting 

when you speak. You can set the 

VOX

 sensitivity level to fit the volume of your 

voice and avoid transmissions triggered by background noise. 

To turn VOX mode on:
1. 

During 

Standby

 mode, press and hold the 

VOX

 

button until the current 

VOX

 status and the current 

VOX Sensitivity Level

 are prompted

 

(Fig. 29).

2. 

Once the 

VOX

 is turned 

on

Blue

 LED flashes every 5 

seconds

 

(Fig. 30).

To turn VOX mode off:

While 

VOX

 feature is ON, press and hold the

 VOX

  

button to turn off the 

VOX

 mode

 

(Fig. 29).

To set VOX sensitivity:
1.

 While 

VOX

 feature is 

ON

, press and release the 

VOX

  button to change the 

VOX Sensitivity Level 

(Fig. 29), and the latest 

VOX Sensitivity Level

 is 

prompted.

Note: 

The current VOX sensitivity level is prompted, the value would be from 1 

to 3. VOX 3 is the most sensitive level and VOX 1 is the least sensitive level.

Vibra Alert

Your radio can alert you to incoming signals by sounding an audible call tone or 

an audible tone with Vibra Alert. 

To turn Vibration Alert feature on:
1.

 During 

Standby

 mode, press and hold the 

Vibra 

Alert 

button (Fig. 31) until there is a long vibration for 

2 seconds.

2.

 Once the Vibration Alert feature is ON, you may 

check if there are 2 successive vibrations feedback 

when press and release the 

Vibra Alert

 button in 

Standby

 mode. 

To turn Vibration Alert off:

While 

Vibra Alert

 feature is ON, press and hold the 

Vibra Alert

 button to turn 

off the 

Vibra Alert

.

Note: Vibra Alert will be suspended during charging.

12

13

ENGLISH

Fig. 29

Fig. 30

Fig. 31

General Specifications

Frequency Allocation and Compatibility 

A = Channel No. for 22 Channel Models
B = Frequency in MHz
C = Power Output

A B  C

1  

462.5625 

High

2  462.5875 High
3  

462.6125 

High

4  

462.6375 

High

5  

462.6625 

High

6  

462.6875 

High

7   

462.7125 

High

8  

467.5625 

Low

9   

467.5875 

Low

10 467.6125  Low
11  

467.6375 

Low

12  

467.6625 

Low

13  

467.6875 

Low

14  

467.7125 

Low

15  

462.5500 

High

16  

462.5750 

High

17  

462.6000 

High

18  

462.6250 

High

19  

462.6500 

High

20  

462.6750 

High

21  

462.7000 

High

22  

462.7250 

High

Key Tone 

Key Tone

 is an audible tone which will sound each time a button is pressed.

Содержание DXFRS265













Отзывы: