37
EnGLIsh
Unpacking
• Remove the saw from the packaging material carefully.
• The machine is fully assembled except for the rip fence,
mitre gauge, dust adapter and blade guard assembly.
• Finalise the assembly following the instructions as
described below.
Mounting the Saw Blade (Fig. A, B)
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
WARNING:
To reduce the risk of injury, wear gloves when
handling the saw blade.
WARNING:
The teeth of a new blade are very sharp and
can be dangerous.
WARNING:
The saw blade
MUST
be replaced as described
in this section.
ONLY
use saw blades as specified under
Technical Data
. We suggest DT99565. NEVER fit other
saw blades.
nOTE:
This tool has blade installed from factory.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories.
An accidental
start-up can cause injury.
Description (Fig. A, C)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Table
2
Blade
3
Rip scale indicator
4
Fine adjust knob
5
Rail lock lever
6
Blade height adjustment
wheel
7
Bevel lock lever
8
ON/OFF assembly
9
Mounting holes
10
Mitre gauge
11
Blade guard assembly
12
Carry handle
13
Dust collection port
14
Guard dust collection port
15
Throat plate
Date Code Position (Fig. A)
The date code
25
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2019 XX XX
Year of Manufacture
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Wear face mask.
Keep hands away from cutting area and the blade.
Carrying point.
Package Contents
The package contains:
1 Partly assembled machine
1 Rip fence assembly
1 Mitre fence
1 Saw blade
1 Upper blade guard assembly
1 Throat plate
2 Blade wrenches
1 Dust extraction adapter
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
16
Rip fence
17
Rip fence latch
18
Narrow ripping fence/
support extension
19
Blade wrenches (stored
position)
20
Push stick (stored position)
21
Riving knife (non-through
sawing) (Fig. C)
22
Mitre gauge storage
23
Cable holder
24
DE7400 brackets mounting
holes
Intended Use
Your table saw has been designed for professional ripping,
cross-cutting, mitreing and bevelling with various materials as
wood analogous materials and plastic.
DO nOT
use under wet conditions or in the presence of
flammable liquids or gases.
This table saw is a professional power tool.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Содержание DWE7485
