English
9
c) Lower guard should be retracted manually
only for special cuts such as “plunge cuts”
and “compound cuts”. Raise lower guard
by retracting handle and as soon as blade
enters the material, the lower guard must be
released.
For all other sawing, the lower guard
should operate automatically.
d)
Always observe that the lower guard is
covering the blade before placing saw down
on bench or floor.
An unprotected, coasting
blade will cause the saw to walk backwards,
cutting whatever is in its path. Be aware of the
time it takes for the blade to stop after switch is
released.
additional Safety instructions for
Circular Saws
•
Wear ear protectors.
Exposure to noise can
cause hearing loss.
• Wear a dust mask.
Exposure to dust particles
can cause breathing difficulty and possible
injury.
• Do not use blades of larger or smaller
diameter than recommended.
For the proper
blade rating refer to the technical data. Use only
the blades specified in this manual, complying
with EN 847-1.
• Never use abrasive cut-off and diamond
wheels. Do not cut concrete, brick, steel or
other hand materials.
•
Do not use water feed attachments.
•
Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
• Do not use this saw as a table saw.
residual risks
The following risks are inherent to the use of circular
saws.
– Injuries caused by touching the rotating parts or
hot part of the tool.
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust
developed when working in wood.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DaTE CoDE PoSiTion (fiG. 1)
The date code (z), which also includes
the year of
manufacture, is printed into the housing.
Example:
2011 XX XX
Year of Manufacture
Package Contents
The package contains:
1 184 mm (7-1/4") circular saw (DWE561) or
1 184 mm (7-1/4") circular saw (DWE565)
1 Circular saw blade
1 Blade wrench
1 Parallel fence
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. 1)
WARNING:
Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Main handle
c. Blade lock
d. End cap
e. Auxiliary handle
f. Bevel adjustment knob
g. Bevel angle adjustment mechanism
h. Base plate
i. Lower blade guard
j. Blade clamping screw
k. Lower guard lever
l. Upper blade guard
Содержание DWE561
