background image

COMPATIBLE ACCESSORIES

Oscillating Sanding Pad
Oscillating Wood with Nails Blade
Wide Titanium Oscillating Wood with Nails Blade
Oscillating Hardwood Blade
Oscillating Fastcut Wood Blade
Wide Oscillating Fastcut Wood Blade
Oscillating Wood Detail Blade
Oscillating Titanium Metal Blade
Oscillating Semicircle Blade
Oscillating Titanium Semicircle Blade
Oscillating Flush Cut Blade
Titanium Oscillating Flush Cut Blade
Oscillating Multi-Material Blade
Oscillating Rigid Scraper Blade
Oscillating Flexible Scraper Blade
Oscillating Carbide Grout Removal Blade
Oscillating Fastcut Carbide Grout Removal Blade
Oscillating Carbide Rasp

Repairs

To assure product SAFETY and RELIABILITY, repairs, maintenance 

and adjustment (including brush inspection and replacement) should 
be performed by a D

E

WALT factory service center, a D

E

WALT 

authorized service center or other qualified service personnel. Always 
use identical replacement parts.

Register Online

Thank you for your purchase. Register your product now for:

 • 

WARRANTY SERVICE:

 Registering your product will help you 

obtain more efficient warranty service in case there is a problem 
with your product.

 • 

CONFIRMATION OF OWNERSHIP:

 In case of an insurance 

loss, such as fire, flood or theft, your registration of ownership will 
serve as your proof of purchase.

 • 

FOR YOUR SAFETY: 

Registering your product will allow us to 

contact you in the unlikely event a safety notification is required 
under the Federal Consumer Safety Act.

Register online at www.dewalt.com/register.

Three Year Limited Warranty

D

E

WALT will repair, without charge, any defects due to faulty materials 

or workmanship for three years from the date of purchase. This 
warranty does not cover part failure due to normal wear or tool 
abuse. For further detail of warranty coverage and warranty repair 
information, visit www.dewalt.com or call 1-800-4-D

E

WALT (1-800-

433-9258). This warranty does not apply to accessories or damage 

caused where repairs have been made or attempted by others. This 
warranty gives you specific legal rights and you may have other rights 
which vary in certain states or provinces.

English

9

Содержание DWE315K











Отзывы: