background image

1

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D

E

WALT TOOL, 

CALL US AT: 

1800 654 155 

(Aust) or 

09 579 7600

 (NZ).

SAFETY INSTRUCTIONS FOR POWER TOOLS

When using power tools, always observe the safety regulations applicable in your 

country to reduce the risk of fire, electric shock and personal injury. Read the following 

safety instructions before attempting to operate this product. Keep these instructions in 

a safe place.

General Safety Rules

WARNING!  Read all instructions. 

Failure to follow all instructions listed below 

may result in electric shock, fire and/or serious injury. The term “power tool” in all 

of the warnings listed below refers to your mains operated (corded) power tool or 

battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

 1. WORK AREA

a.  Keep work area clean and well lit. 

Cluttered and dark areas invite accidents.

b.   Do not operate power tools in explosive atmospheres, such as in the 

presence of flammable liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

c.   Keep children and bystanders away while operating a power tool. 

Distractions can cause you to lose control.

 2. ELECTRICAL SAFETY

a.   Power tool plugs must match the outlet. Never modify the plug in any 

way. Do not use any adapter plugs with earthed (grounded) power tools. 

Unmodified plugs and matching outlets will reduce risk of electric shock.

b.   Avoid body contact with earthed or grounded surfaces such as pipes, 

radiators, ranges and refrigerators.

 There is an increased risk of electric 

shock if your body is earthed or grounded.

c.   Do not expose power tools to rain or wet conditions.

 Water entering a power 

tool will increase the risk of electric shock.

d.   Do not abuse the cord. Never use the cord for carrying, pulling or unplugging 

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

 

Damaged or entangled cords increase the risk of electric shock.

e.   When operating a power tool outdoors, use an extension cord suitable 

for outdoor use.

 Use of a cord suitable for outdoor use reduces the risk of 

electric shock.

MINIMUM GAGE FOR CORD SETS

For Cable length (m):

 

 

7.5  15  25 30 45 60

Use Cable with minimum rating (Amperes)
Tool Amperes

 

3.4 

   7.5  7.5 

  7.5 7.5 7.5 7.5

 

3.5 

5.0   7.5  7.5  7.5 7.5 10 15

  5.1 - 7.0 

 

10 

10 

10 

10 

15 

15

  7.1 - 12.0   

15 

15 

15 

15 

20 

20

 12.1 - 20.0   

20 

20 

20 

20 

25 

 –

 3. PERSONAL SAFETY

a.   Stay alert, watch what you are doing and use common sense when 

operating a power tool. Do not use a power tool while you are tired or 

Definitions: Safety Guidelines 

The definitions below describe the level of severity for each 

signal word. Please read the manual and pay attention to 

these symbols.

DANGER:

 Indicates an imminently hazardous situation 

which, if not avoided, 

will

 result in 

death or serious injury

.

WARNING:

 Indicates a potentially hazardous situation 

which, if not avoided, 

could

 result in 

death or serious injury

.

CAUTION:

 Indicates a potentially hazardous situation 

which, if not avoided, 

may

 result in 

minor or moderate 

injury

.

CAUTION:

 Used without the safety alert symbol indicates a 

potentially hazardous situation which, if not avoided, 

may

 

result in 

property damage.

Содержание DW849-XE













Отзывы: