DeWalt DW729KN, Оригинальное руководство пользователя

Страница: 25 / 96

23
ENGLIsh
General Safety Instructions
WARNING: When using electric tools basic safety precautions should always be followed
to reduce the risk of fire, electric shock and personal injury including the following.
Read all of these instructions before attempting to operate this product and save
these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
1 . Keep work area clear.
- Cluttered areas and benches invite injuries.
2 . Consider work area environment.
- Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the
work area well lit (250 - 300 Lux). Do not use the tool where there is a risk of causing fire or
explosion, e.g. in the presence of flammable liquids and gases.
3 . Guard against electric shock.
- Avoid body contact with earthed surfaces (e.g., pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions (e.g., high humidity, when metal swarf is
being produced, etc.), electric safety can be improved by inserting an isolating transformer
or a (FI) earth-leakage circuit-breaker.
4 . Keep other persons away.
- Do not let persons, especially children, not involved with the work, touch the tool or the
extension cord and keep them away from the work area.
5 . Store idle tools.
- When not in use, tools must be stored in a dry place and locked up securely, out of reach
of children.
6 . Do not force the tool.
- It will do the job better and safer at the rate to which it was intended.
7 . Use the right tool.
- Do not force small tools to do the job of a heavy duty tool. Do not use tools for purposes
not intended; for example do not use circular saws to cut tree limbs or logs.
8 . Dress properly.
- Do not wear loose clothing or jewellery, as these can be caught in moving parts. Non-skid
footwear is recommended when working outdoors. Wear protective hair covering to
contain long hair.
9 . Use protective equipment.
a
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury .
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury .
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury .
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage .
Denotes risk of electric shock.
Denotes risk of fire.
EC‑Declaration of Conformity
Machinery Directive
o
Radial Arm Saw
DW729KN
D
e
WALT declares that these products described under Technical Data are in compliance with:
2006/42/EC, EN60204‑1:2018; EN1870‑17:2012 +A:2015.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information,
please contact
D
e
WALT at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and makes this declaration
on behalf of
D
e
WALT .
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
e
WALT , Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
20.11.2020
NOTE: The figures are emission levels and are not necessarily safe working levels. Whilst there
is a correlation between the emission and exposure levels, this cannot be used reliably to
determine whether or not further precautions are required. Factors that influence the actual
level of exposure of the workforce include the characteristics of the workroom and the other
sources of noise, etc. i.e. the number of machines and other adjacent processes. Also, the
permissible exposure level can vary from country to country. This information, however, will
enable the user of the machine to make a better evaluation of the hazard and risk.
DW729KN
Power input W 4000
Power output W 3300
Type 2
Voltage V 400
Blade diameter mm 350
Blade bore mm 30
Spindle diameter mm 30
No‑load speed, 50 Hz min
‑1
3000
Load speed, 50 Hz min ‑1 2780
Depth of cut at 90° mm 110
Max. crosscut capacity at 0° mm 525
Max. mitre cut capacity at 45°
right hand mm 365
left hand mm 150
Depth of cut at 45° mm 75
Max. crosscut capacity at 0° mm 525
Max. mitre cut capacity at 45°
right hand mm 250
left hand mm 270
Overall dimensions (with legstand) cm 181 X 134 X 152
Dust extraction adapter mm 100
Recommended dust extraction values
Air velocity at the point of connection m/s 20
Volume metric flow m³/h 500
Vacuum value at the point of connection PA 5000/2400
Dust extraction port mm 100
Cross area section cm 2 78.5
Dust extraction port mm 40
Cross area section cm 2 12.6
Weight kg 149
Automatic blade brake time < 10sek
Duty cycle min 1’/3’
Protection grade IP5X
Noise values and vibration values (triax vector sum) according to EN61029‑1:
L
PA
(emission sound pressure level) dB(A) 96
L
WA
(sound power level) dB(A) 3.0
K (uncertainty for the given sound level) dB(A) 109
Vibration emission value a
h
= m/s 2 2.0
Uncertainty K = m/s
2
1.9
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough product development and
innovation make D
e
WALT one of the most reliable partners for professional power tool users.
Technical Data
English (original instructions)
RADIAL ARM SAW
DW729K