DeWalt DW331-XE, Инструкция по эксплуатации

Страница: 8 / 12

6
Setting the Bevel Angle (Fig. 3)
The adjustable shoe (I) allows cutting of LH and RH bevel angles up to 45 ˚ . The bevel
scale has preset positions at 0 ˚ , 15 ˚ , 30 ˚ and 45 ˚ .
1. Release the shoe lever (K).
2. Slide the shoe (I) toward the saw blade.
3. Tilt the shoe and set the desired bevel angle using the scale.
4. Tighten the shoe lever.
FIG. 3
I
K
Setting the Pendulum Stroke (Fig. 1)
The adjustable pendulum stroke guarantees a perfect cutting stroke for different
materials.
Slide the selector (J) to the desired position referring to the table below. The selector
can be manipulated during operation.
Position Wood Metal Plastics
3 Fast cuts – PVC
2 Thick workpieces – Fibreglass
Acrylic
Position Wood Metal Plastics
1 Plywood Aluminium –
Chipboard Non-ferrous –
0 Thin workpieces Sheet metal –
Fine cuts
Setting the Sawdust Blower (Fig. 1)
The sawdust blower conducts an adjustable stream of air to the saw blade to keep the
workpiece clear of sawdust during operation.
Set the sawdust blower using the lever (D).
Low For working with metals, when using coolants and lubricants
and for use with dust extraction.
Intermediate For working with wood and similar materials in low speed.
High For working with wood and similar materials in high speed.
Mounting the Plastic
FIG. 4
L
Anti-Scratch Shoe Cover
(Fig. 4)
The anti-scratch shoe cover (L)
reduces damage to the surface of
(sensitive) workpieces.
Click the cover onto the shoe as
shown.
Mounting and Removing
the Anti-Splinter Shoe
(Fig. 5A, 5B)
The anti-splinter shoe insert (M)
which fits close to the saw blade reduces splintering of the workpiece.
The insert can be mounted into the shoe and the shoe cover.
Hold the insert (M) in the orientation as shown.