4
WARNING: Always wear proper personal hearing protection that conforms to
AS/NZS1270 during use.
Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ................. volts
A ...............amperes
Hz ............... hertz
W ..............watts
min ............. minutes
...........alternating current
........ direct current
...........alternating or direct current
.............. Class I Construction
no ..............no load speed
...................
...................
(grounded) n
................rated
speed
.............. Class II Construction
.............earthing terminal
...................
(double insulated)
..............safety alert symbol
…/min ........ per minute
BPM ..........beats per minute
IPM ............. impacts per minute
RPM ..........revolutions per minute
SPM ............ strokes per minute
sfpm ..........surface feet per minute
SAVE THESE INSTRUCTIONS FOR FUTURE USE
COMPONENTS (Fig. 1)
WARNING:
Never modify the power tool or any part of it. Damage or personal
injury could result.
A. On/off switch
G. Blade holder
B. Lock-on button
H. Guide roller
C. Speed control dial
I. Shoe
D. Sawdust blower control
J. Pendulum stroke selector
E. Blade latch
K. Shoe lever
F.
Finger
guard
•
Do not operate this tool for long periods of time.
Vibration caused by the
operating action of this tool may cause permanent injury to fingers, hands, and
arms. Use gloves to provide extra cushion, take frequent rest periods, and limit
daily time of use.
• Air vents often cover moving parts and should be avoided.
Loose clothes,
jewelry or long hair can be caught in moving parts.
WARNING:
We recommend the use of a residual current device with a residual
current rating of 30mA or less.
WARNING: ALWAYS wear approved protective safety equipment complying with
the following standards:
• Eye protection: AS/NZS1337 Eye Protectors for Industrial Applications;
• Hearing protection: AS/NZS1270 Acoustics – Hearing Protection;
• Respiratory protection: AS/NZS1716 Respiratory Protective Devices.
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding,
drilling, and other construction activities. Wear protective clothing and wash
exposed areas with soap and water.
Allowing dust to get into your mouth, eyes,
or lay on the skin may promote absorption of harmful chemicals.
WARNING:
Use of this tool can generate and/or disburse dust, which may cause
serious and permanent respiratory or other injury. Always use AS/NZS1716 approved
respiratory protection appropriate for the dust exposure. Direct particles away from
face and body.
Содержание DW331-XE
Страница 1: ...DW331 XE JIGSAW INSTRUCTION MANUAL ...
Страница 2: ......
