DeWalt DW0165N, Руководство пользователя

Страница: 18 / 82

18
E
8.
Measure the height (Figure
O 3
).
• Position the tool at one end of the room
or object and point the laser dot across
the height. (Figure
O 3
shows where
to position the tool if you are measuring
from the bottom of the tool).
• Press to display the height
measurement on the third line of the
screen.
9.
Follow the same steps to measure the
width , length , and height of the second
room or object.
10.
View the Volume measurement at the
bottom of the screen (Figure
O 4
).
Measuring the Height of a Tall Object
If you need to measure the height of a tall
object (e.g., a tall building), you can calculate
the height based on the distance to 1 point
or the distances from the same point to 2
points on the object. The tool will use the
Pythagorean Theorem (C
2
=A
2
+B
2
) to calculate
the height.
Distance to 1 Point
You can use the distance to one point on a
wall or object (Indirect Height) to determine
its height (Figure
P
).
1.
Point the tool's laser (Figure
A 1
) toward
a wall or object, and not toward anyone's
eyes.
2.
Press (Figure
A 3
) to turn the tool
on and display the red laser dot.
3.
Make sure the tool position setting
(Figure
C 4
) is correct for taking the
measurement.
4.
Select as the measurement type.
• Press to display the Main Menu
(Figure
E 2
).
• Press to select .
• Press
to display the Measurement
Type Menu (Figure
E 3
).
• Press the arrow buttons to select .
• Press .
5.
Position the tool opposite the bottom of
the vertical height to be measured (Figure
P 1
).
6.
Point the laser toward the highest point of
the building or object whose height you
need to measure (Figure
P 1
).
7.
Press to measure the distance.
8.
View the height measurement at the
bottom of the screen (Figure
P 2
).
Distances to 2 Points
You can use the distance to two points on
a wall or object (Double Indirect Height) to
determine its height (Figure
Q
).
1.
Point the tool's laser (Figure
A 1
) toward
a wall or object, and not toward anyone's
eyes.
2.
Press (Figure
A 3
) to turn the tool
on and display the red laser dot.
3.
Make sure the tool position setting
(Figure
C 4
) is correct for taking the
measurement.