DeWalt DW0165N, Руководство пользователя

Страница: 16 / 82

16
E
Adding/Subtracting 2 Areas
You can measure the area of a wall, floor,
or object and then add it to, or subtract it
from, the area of another wall, floor, or object
(Figure
M
).
1.
Point the tool's laser (Figure
A 1
) toward
a wall or object, and not toward anyone's
eyes.
2.
Press (Figure
A 3
) to turn the tool
on and display the red laser dot.
3.
Make sure the tool position setting
(Figure
C 4
) is correct for taking the
measurement.
4.
Select as the measurement type.
• Press to display the Main Menu
(Figure
E 2
).
• Press to select .
• Press
to display the Measurement
Type Menu (Figure
E 3
).
• Press the arrow buttons to select .
• Press .
5.
Press to add, or to subtract, the
areas of two walls, floors, or objects.
6.
Measure the width of the first wall, floor, or
object (Figure
D 1
).
• Position the tool at one end of the wall,
floor, or object and point the laser dot
across the width. (Figure
M 1
shows
where to position the tool if you are
measuring from the bottom of the tool.)
• Press to display the width
measurement at the top of the screen.
7.
Measure the length of the first wall, floor,
or object (Figure
M 2
).
• Position the tool at one end of the wall,
floor, or object and point the laser dot
across the length. (Figure
M 2
shows
where to position the tool if you are
measuring from the bottom of the tool.)
• Press to display the length
measurement on the second line of the
screen.
8.
Follow the same steps to measure the
width and length of the second wall, floor,
or object.
9.
View the Area measurement at the bottom
of the screen (Figure
M 3
).
Measuring Volume
You can measure the volume of a room or
object (Figure
N
).
1.
Point the tool's laser (Figure
A 1
) toward
a wall or object, and not toward anyone's
eyes.
2.
Press (Figure
A 3
) to turn the tool
on.
3.
Make sure the tool position setting
(Figure
C 4
) is correct for taking the
measurement.
4.
Select as the measurement type.
• Press to display the Main Menu
(Figure
E 2
).
• Press to select .
• Press
to display the Measurement
Type Menu (Figure
E 3
).
• Press the arrow buttons to select .
• Press
.