DeWalt DE9115, Руководство пользователя

Страница: 12 / 56

9 en - 1
E N G L I S H
Manufacturer’s declaration
DE9115
D
E
WALT declares that this unit has been designed
in compliance with: 89/336/EEC, 89/392/EEC,
73/23/EEC, EN 60335, EN 55014, EN 55104 &
EN 50144.
For more information, please contact D
E
WALT at
the address below or refer to the back of the manual.
This unit must not be put into service until it was
established that the Power Tool to be connected
to this unit is in compliance with 89/392/EEC
(identified by the CE-marking on the Power Tool).
Director Engineering and Product Development
Horst Großmann
D
E
WALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
Table of contents
Technical data en - 1
Manufacturer’s declaration en - 1
Safety instructions en - 2
Package contents en - 2
Description en - 2
Electrical safety en - 2
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 3
Instructions for use en - 3
Maintenance en - 3
Guarantee en - 4
Technical data
DE9115
Mains voltage V 230
Output V
DC
6.0 - 14.4
Charge current
normal mode A 7.5
equalise mode mA 120
maintenance mode mA 40
Charging time
2 Ah packs min 20
1.7 Ah packs min 15
1.3 Ah packs min 10
Weight kg 0.9
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard!
QUICK CHARGER DE9115