5
THE DETECTOR DOES NOT RESPOND TO THE BEAM FROM ANOTHER LASER UNIT
• The D
E
WALT Digital Laser Detector has been designed to work only with the
DW088 and the DW089 and certain other compatible line lasers.
THE DETECTOR GIVES OFF A TONE BUT THE LCD DISPLAY WINDOW DOES NOT
FUNCTION
• If the detector is very cold, allow it to warm up in a heated area.
• If the LCD display window is still not functioning, take the detector to a D
E
WALT
service centre.
BRIGHT LIGHT SHINING ON DETECTOR CAUSES CONTINUOUS “ON-GRADE”
SIGNAL
• In the presence of very intense ambient light, the detector may give a false or
erratic indication of level.
• Reposition the detector out of the intense light or shade the sensor window (i) to
resume normal operation.
Accessories
WARNING:
Since accessories, other than those offered by D
E
WALT, have not been
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
E
WALT recommended accessories should be used
with this product.
Recommended accessories for use with your tool are available at extra cost from
your local service center. If you need any assistance in locating any accessory, please
contact Stanley Black & Decker, 82 Taryn Drive, Epping, VIC 3076 Australia or call
1800 444 224 or (NZ) 0800 339 258.
Batteries
When disposing batteries, think of the protection of the environment. Check with your
local authorities for an environmentally safe way of battery disposal.
Содержание DE0892-XE
Страница 1: ...DE0892 XE LASER DETECTOR INSTRUCTION MANUAL ...
Страница 2: ......