background image

2

  •   Remove dead batteries immediately and dispose of per local codes.
  •  Do not dispose of batteries in fire.
  •   Keep batteries out of reach of children.
  •   Remove batteries if the device will not be used for several months.
 • 

Young children and the infirm.

 This appliance is not intended for use by young 

children or infirm persons without supervision.

    –  This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety.

    –  Children should be supervised to ensure that they do not play with the appliance.

  •  Air vents often cover moving parts and should be avoided. 

Loose clothes, 

jewelry or long hair can be caught in moving parts.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

COMPONENTS (Fig. 1)

WARNING: 

Never modify this tool or any part of it. Damage or personal injury 

could result.
  A. LCD display window  

I.  Sensor window

 B. Speaker 

J. Clamp latch

  C. Battery compartment cover 

K.  Tracks

 D. Marking notches 

L. Rail

 E. Power button 

M. Latch

  F. Volume button 

N.  Latch hole

  G. Accuracy button 

O.  Clamp knob

 H. Magnets
The detector gives both visual signals through the LCD display window (A) and audio 

signals through the speaker (B) to indicate the location of the laser beam.
The D

E

WALT Digital Laser Detector can be used with or without the detector clamp. 

When used with the clamp, the detector can be positioned on a grade rod, leveling 

pole, stud or post.

N

L

H

E

G

F

C

A

D

I

B

FIG. 1

INTENDED USE

The D

E

WALT Digital Laser Detector helps in locating a laser beam emitted by the laser 

in bright light conditions or over long distances. The detector can be used in both 

indoor and outdoor situations where it is difficult to see the laser beam. 
The detector is designed exclusively for use with the DW088-XE and DW089-XE line 

laser and other compatible D

E

WALT line lasers. It is not for use with rotating lasers. 

DO NOT 

use under wet conditions or in presence of flammable liquids or gases.

The digital laser detector is a professional laser accessory.

DO NOT

 let children come into contact with the attachment and laser. Supervision is 

required when inexperienced operators use this laser.

Содержание DE0892-XE









Отзывы: