English
9
Switching ON/OFF (Fig. F)
WARNING:
Use both hands to grip the
product firmly when switching on.
CAUTION:
Do not point unit discharge at
self or bystanders.
• To turn the blower ON, ensure the speed lock lever
2
is
in the off position and depress the trigger switch
1
.
• To lock the blower ON, pull back on the speed lock lever
2
, as shown in fig. H. The blower runs at higher speeds
as the lever is moved further. The speed lock lever can
also be pulled back to start the blower without needing
to first depress the trigger switch.
• To turn the blower OFF, release the trigger switch
1
and
or push forward on the speed lock lever and return it to
its off position.
fig. H
2
1
Use (Fig. G)
CAUTION:
Do not point unit discharge at
self or bystanders.
CAUTION:
Always wear safety glasses and
hearing protection. Wear a filter mask if the operation
is dusty. Use of gloves, long pants and substantial
footwear is recommended. Keep long hair and loose
clothing away from openings and moving parts.
• Install the battery pack
10
into the battery housing.
• Hold the blow tube approximately 7 inches (180 mm)
above the ground, turn the blower ON and using a
sweeping motion from side to side, advance slowly
keeping the accumulated debris/leaves in front of you
as shown in Fig. G.
Fig. G
MAINTENANCE
WARNING:
To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories.
An accidental start-up can cause injury.
Cleaning
WARNING:
Blow dirt and dust out of
all air vents with clean, dry air at least once a week.
To minimize the risk of eye injury, always wear ANSI
Z87.1 approved eye protection when performing this
procedure.
WARNING:
Never use solvents or other
harsh chemicals for cleaning the non-metallic parts
of the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Accessories
WARNING:
Since accessories, other than
those offered by
D
e
WALT
, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
D
e
WALT
recommended accessories should be used
with this product.
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact
D
e
WALT
Industrial
Tool Co., 701 East Joppa Road, Towson, MD 21286, call
1-800-4-
D
e
WALT
(1-800-433-9258) or visit our website:
www.dewalt.com.
