DeWalt DC305-XE, Инструкция по эксплуатации

Страница: 12 / 16

10
FIG. 13
NOTE: It is generally recommended that when cutting metals you should spread
a thin film of oil or other lubricant along the line ahead of the saw cut for easier
operation and longer blade life.
MAINTENANCE
Cleaning
WARNING: When cleaning, use only mild soap and a damp cloth on plastic parts.
Many household cleaners contain chemicals which could seriously damage plastic.
Also, do not use gasoline, turpentine, lacquer or paint thinner, dry cleaning fluids or
similar products which may seriously damage plastic parts. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Disconnect the charger from the AC outlet before cleaning. Dirt and
grease may be removed from the exterior of the charger using a cloth or soft non-metal-
lic brush. Do not use water or any cleaning solutions.
LUBRICATION
Your tool was properly lubricated before leaving the factory. In two to six months,
depending upon use, take or send your tool to a Service Center, or authorized service
station, for a complete cleaning, inspection and lubrication. Tools used constantly on
production jobs will need relubrication more often. Also, tools “out of service” for long
periods should be relubricated before being put back to work.
ACCESSORIES
Recommended accessories for use with your tool are available at extra cost from your
local service center. If you need any assistance in locating any accessory, please con-
tact D
E
WALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138 Australia or
call 1800 654 155 or (NZ) 09 526 2556.
CAUTION: The use of any other accessory not recommended for use with this tool
could be hazardous.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustments
should be performed by a D
E
WALT factory service center, a D
E
WALT authorized
service center or other qualified service personnel. Always use identical replacement
parts.
Guarantee
Applicable to hand held Power Tools, Lasers and Nailers.
Three Year Limited Warranty
D
E
WALT will repair, without charge, any defects due to faulty materials or workmanship
for three years from the date of purchase. Please return the complete unit, transportation
prepaid, to any D
E
WALT Service Centre, or any authorised service station.
For warranty repair information, call (AUS) 1800 654 155 or (NZ) 09 526 2556.
This warranty does not apply to
• Accessories
• Damage caused where repairs have been made or attempted by others.
• Damage due to misuse, neglect, wear and tear, alteration or modification.
This warranty gives you specific legal rights and you may have other rights under the
provisions of the Consumer Guarantee Act 1993 (New Zealand only), Trade Practices
Act 1974 and State Legislation (Australia only).
In addition to the warranty, D
E
WALT tools are covered by our:
FREE ONE YEAR SERVICE CONTRACT
D
E
WALT will also maintain the tool for free at any time during the first year of
purchase. This includes labour, parts and lubrication required to restore the product to
sound mechanical and/or electrical condition. Normal wear parts are not covered in
this service. Carbon brushes worn more then 50% will be replaced.