6. Apply grease provided to o-rings in head valve prior to assembly.
7. Remove cylinder hold down (G) from tool.
8. Remove piston/driver subassembly (H), cylinder (I), bumper (J),
bumper plate (N) and bulkhead (K) from tool.
N
J
H
I
D512751 - 15 Gauge O-ring
Repair Kit Instructions
FOR USE WITH D51275 15 GA. ANGLED FINISH NAILER
If you should have difficulty understanding the following instruc-
tions contact a D
E
WALT service center or an authorized D
E
WALT
service person.
Important Safety Instructions
•
Read and understand tool instruction manual before attempting
repairs.
•
Use only genuine D
E
WALT Replacement Parts.
•
Always wear ANSI compliant eye protection.
•
Disconnect air from tool and remove all nails before servicing.
•
Always point tool in safe direction when reconnecting air supply.
CAUTIONS:
•
Do not allow dirt, dust or other foreign materials to enter the tool.
•
Be careful not to scratch or damage the o-rings or any internal
surfaces.
1. Disconnect air from tool before servicing or repairing.
2. Remove all nails from tool.
3. Remove 4 screws from top cap (A) with 4 mm allen wrench
provided in kit box.
4. Pull head valve (B), head valve spring (C), and top bumper (D) out
of top cap through center of head valve opening.
5. Replace internal (E-#398156-00) and external (F-#609018-
00/Red Dot) o-rings on head valve.
E
F (RED DOT)
B
C
D
B
A
O-RING DESC.
# IN KIT
PART #
REF. LETTER
O-Ring 48.5 x 2.53
1
609018-00
F (Red Dot)
O-Ring 39.8 x 2.5
1
398156-00
E
O-Ring 36.7 x 3.5
1
398157-00
L
O-Ring 49 x 2
1
398158-00
M
O-Ring 70 x 2.5
1
398159-00
K(1)
O-Ring 48.9 x 2.5 (Type 1)
1
398160-00
K(2)
O-Ring 45.5 x 2 (Type 2)
1
398167-00
K(2)
Top Cap Gasket
1
395061-00
O
Seal, Cylinder
1
395065-00
Q
Grease Tube
1
606112-00
PART#
398158-00
PART#
398157-00
PART # 398167-00
(TYPE 2)
D
E
WALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286
(DEC05) Form No. 623233-00 D512751
Copyright © 2004, 2005 D
E
WALT
The following are trademarks for one or more D
E
WALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array of pyramids on the handgrip;
the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.
PART#
609018-00
(RED DOT)
(POINT ROUGE)
(PUNTO ROJO)
PART#
398156-00
PART#
398159-00
PART # 398160-00
(TYPE 1)
