DeWalt D25810, Оригинальное руководство пользователя

Страница: 17 / 84

15
EngLIsH
EC-Declaration of Conformity
Machinery Directive
Heavy-Duty Chipping Hammer
D25810, D25811
D
e
WALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
Nürnberg, Germany, Notified Body ID No.: 0197.
Level of sound power according to 2000/14/EC (Article 12,
Annex III, No. 10; m ≤ 15 kg):
L
WA
(measured sound power level) dB 100
L
WA
(guaranteed sound power level) dB 103
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT .
Markus Rompel
Vice President of Engineering PTE Europe
D
e
WALT , Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
24.10.2018
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury .
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury .
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury .
NOTICE:
Indicates a practice
not related to
personal injury which, if not avoided, may result in
property damage .
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough
product development and innovation make D
e
WALT one of the
most reliable partners for professional power tool users.
Technical Data
D25810 D25811
Voltage V
AC
230 230
(U.K & Ireland only) V
AC
230/115 230/115
Type 1 1
Frequency Hz 50 50
Power Input W 1050 1050
No-load beats per minute bpm 3150 3150
Single impact energy (EPTA 05/2009) J 7.1 7.1
Tool holder SDS-Max 17mm-HEX
Collar diameter mm 76 76
Weight (including handle) kg 5.6 5.7
Noise and vibration total values (triax vector sum) according to EN60745-2-6:
L
PA
(emission sound pressure level) dB(A) 94 94
L
WA
(sound power level) dB(A) 105 105
K (uncertainty for the given sound level) dB(A) 3 3
Chiselling
Vibration emission value a
h,Cheq
= m/s² 8.5 8.5
Uncertainty K = m/s² 1.5 1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in
EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the
vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to
vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (
relevant for vibration ), organisation of
work patterns.
English (original instructions)
HEAVY-DUTY CHIPPING HAMMER
D25810, D25811