Devolo dsl+ 1100 LAN, Руководство пользователя

Страница: 18 / 30

Connection and installation
|
|
devolo dsl+ 1100 LAN
|
18
Linux (SuSE 10.0)
햲
In the K Menu, select System YaST Control Center Network
Devices DSL .
햳
On the 'DSL Configuration Overview' tab, click Add .
햴
In the following dialog box, select the correct network adapter under 'PPP
Mode' 'PPP over Ethernet' and under 'Ethernet Card'. All other default set-
tings can remain as they are. Confirm your choice by clicking
Next .
햵
Please select your Internet provider if listed and click Next . If your Internet
provider is not listed, click New to add the provider.
햶
Enter the log-in information ('user name', 'password', 'provider name')
given to you by your Internet provider and click
Next .
햷
The 'Connection Parameters' will be displayed in the next dialog box. The
default settings are optimal for your connection and can be used as they are.
Confirm your choice by clicking
Next
.
Please read the additional explanations provided in the menu.
햸
Finally, complete the configuration of your Internet access by clicking Exit .
Starting and stop-
ping the Internet
connection
햹
When using your Internet connection for the first time, click Internet
Dial-up in the K Menu. The 'KInternet – Internet-Tool' plug icon will
appear in the lower right corner of the screen. Start the Internet connection
by clicking this icon and selecting
Dial-in from the drop-down list. To end
the connection, select Hang-up .
Dial-up on Demand:
The set options for dial-up on demand and idle time do
not function reliably in all distributions. Please test these settings prior to use.
Additional information:
The “HowTos” section of http://www.adsl4linux.de
provides lots of additional information and instructions to help you install and
configure the driver.