Devine Centro 2i2o Скачать руководство пользователя страница 4

Safety Instructions

Everyone involved with the installation, operation and maintenance of this device must:
- Be qualified
- Be skilled
- Have read the instructions in this user manual
- Be sure that neither the device nor the included accessories are damaged. Should the 
device or the included accessories be damaged, please contact your dealer for more 
information.
- Ensure that the device is in good working condition and is safe to operate. Please follow 
the advice and instructions as they are described in this user manual.

Damage caused by misuse and/or modifications made to the device are not covered by the
warranty.
This device does not contain any parts that can be repaired or replaced by the user. 
Should maintenance or repairs be necessary, they must be handled by a qualified 
technician.
The light source of this device is not replaceable. If the light source no longer functions, the
entire device needs to be replaced. 

Important information regarding safety and health:

- Do not remove any labels or stickers from this device.
- Do not leave any cables lying around.
- The device should not be opened up, and any hardware or software that may be present 
should not be modified.
- To achieve optimal performance, inputs on the device should not be fed with a signal 
higher than necessary.
- The device should only be used indoors; contact with water, rain and moisture should 
always be avoided. Do not place any objects containing liquid on top of the device.
- Remove the device from any nearby flames or heat sources; do not place it near 
flammable fluids, gasses or objects.
- Disconnect this device from a power source if it will not be used for a longer period of 
time, if maintenance is necessary, or if it needs to be cleaned.
- Do not pull on the cable to remove a connector, as it can cause damage.

The informaton shown in this user manual is subject to change without further notice.

Version:
1.0

Date of creation and author's initials: 
24-10-2019 RV

Date of revision and author's initials:  -

WARNING!

Keep this device away from moisture, water and rain to avoid the chance of 
electric shocks.

Содержание Centro 2i2o


















Отзывы: