Use of the speaker
This speaker is designed to perform in professional environments. Either speech, music, or any other
type of sound can be played trough this speaker.
The Artis A-series are equipped with their own power amplifier, mounted on the rear of the speaker.
This module also houses the internal USB/SD MP3-player and the several conne volume
controls.
The built-in power amplifier is capable to produce enough power for the speaker alone, but for specific
situations it is possible to connect a passive Artis speaker for better sound dispersion (e.g. for
presentations and other low-volume applications). Take notice that the maximum power of the
amplifier will slightly decrease, because it has to provide power to two speakers on a low impedance.
The built-in USB/SD MP3-player supports most USB-thumbdrive and SD(HC)-cards. However, the
results of some models may vary as many manufacturers have their own standards. The display shows
track information and with the silver buttons you are able to browse through your data. It is not possible
to mix the USB- and SD-slot, only one at a time can be used.
Make sure you connect the right audio sources to the right inputs. The mic input is suitable for most
microphones, but does not supply phantom power, if your microphone requires that. The line input is
suitable for RCA-sources (MP3-players, laptops, smartphones, tablets) and can also be used with an
adapter cable to a 3.5mm jack (not included). A XLR-connector is provided for professional audio
sources, such as DJ or PA mixers, electronic keyboards and so on. The line output is used to connect a
second speaker, such as another Artis active speaker. The speaker output is only suitable for passive
speakers, such as the Artis passive speakers. Contact your local dealer when in doubt, as a wrong
connection may cause permanent damage.
This speaker comes with two monitor stands, which makes horizontal positioning possible. This
feature is often used when the speaker needs to perform as a floor monitor for artists.
Mount the monitor stands as illustrated below:
This speaker is also equipped with a lockable 35mm stand adapter, which makes it possible to place the
speaker on a suitable height. This makes the distribution of high and mid-frequencies easier. See the
image above for details. The lockable screw-knob positions the speaker firmly on your speaker stand,
thus preventing any type of resonance.
Warranty is void when damage to this speaker is caused by improper use. When any damage to this
speaker occurs, please contact your local dealer for help.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 3.0
Creation date + author initials: 27-03-2014 RV Revision date + author initials: 27-03-2014 RV
