Practical information and tips for optimal use of
your speaker system
For optimal performance and a long lifespan of your speaker, please pay attention to the
following when using your Devine speaker:
- This speaker is equipped with a CLIP limiter, which prevents damage to the speaker. This CLIP
limiter will activate at excessive volume levels and a red LED shows when the CLIP limiter is active.
Prevent the activation of the CLIP limiter system and the indicating LED. The CLIP limiter protects
the system from permanent damage, but is only effective at peak signals. Long term exposure
causes distortion and power overload, with possible permanent damage to your speaker system.
- When using an external mixer (such as a PA-mixer or DJ-mixer, make sure your master channel
sends out signals at 0dB maximum. This will provide optimal signal quality and with the volume
control on the speaker you are able to turn up the volume, just before the CLIP limiter LED will slightly
flash. This way you are using the speaker to its full potential with optimal sound quality.
- When using the internal two-band equalizer system and adjusting the sound balance of your
speaker, keep the master volume on a medium, neutral level which is comfortable to your ears.
When you want to add extra bass, try to decrease the Treble-intensity first. When you want to
add more high frequencies (for vocal and speech applications), try to decrease the bass level
first.
This way, the EQ system does not have to function as a pre-amplifier, thus providing optimal sound
quality.
- Do not remove the protective cover in front of the voltage-switch. The correct voltage is pre-defined
at 230V AC. When selecting the wrong voltage you may cause permanent damage to the speaker
and its internal components. Only select the 115V AC option when your local power source is capable
of delivering this voltage.
- Do not switch the power on and off frequently as this reduces the lifespan of the speaker and its
internal components. The speaker can be used for a whole day without any cooling-down time, if
sufficient cooling is provided.
- The speaker is equipped with an internal fuse, located directly above the IEC power input section. If
this fuse blows for any reason, only replace it with a fuse that has the same values as the original
fuse. Do not bridge the gap with any electrical wiring or whatsoever as this voids your warranty.
- Severe shocks and impact must be prevented as much as possible. Secure this speaker properly in
place during transport to prevent damage to the housing and the internal components of the speaker.
