background image

EN

SB-6-146-R1  (5/2018)

2 / 4

www.carlisleft.com

4.  Remove the filter element by loosening the baffle counter-

clockwise. Clean or replace the filter element. The element 

can be cleaned by blowing off with a duster gun (clean from 

inside out). Frequency of element cleaning/replacement 

will depend upon air quality, air usage, and condition of the 

air piping. It is recommended to check and clean/replace  

the element every 3-6 months.

5.  Inspect o-ring (2) for damage. Replace if necessary.

6.  Inspect plastic bowl for signs of damage such as cracks, 

crazing or deterioration. Replace if necessary. See "Caution" 

at beginning of "Maintenance" section, page 1.

Note

Do not wash plastic bowl with the automatic drain installed. 

Water can get into the float mechanism, causing the drain 

to malfunction. Remove the automatic drain before clean-

ing the plastic bowl with soap and water (no solvents).

Do not place unit in service without metal bowl  

guard installed.

7.  Before placing unit back into service, make sure plastic  

bowl and metal bowl guard are properly installed and se-

curely locked in place.

8.  Confirm automatic drain operates properly after unit is in 

operation. Replace if necessary.

    

 

Ind.

 Ref  Replacement   

Parts

  No.  Part No. 

Description 

Req.

  1  HAF-502 

Air Filter, 100 CFM, See Fig.2 

1

  2  HAF-21 

Cross Manifold 

1

  3  GA-288 

Air Gauge, 0-160 psi (main line) 

1

  4  83-2727 

Air Gauge, 0-100 psi (regulated) 

1

  5  HAR-507 

Air Regulator (See Fig. 3) 

1

  6  — 

1/4" Street Elbow, 90° 

1

  7  VA-542 

Ball Valve 

2

PARTS LIST – Model HFRL-508 

FIGURE 1   MODEL HFRL-508 FILTER/REGULATOR (60 CFM)

FIGURE 2   MODEL HAF-502 FILTER (100 CFM)

1

6

5

4

3

2

8

7

10

(Optional)

9

1

5

4

3

2

7

6

    

 

Ind.

 Ref  Replacement   

Parts

  No.  Part No. 

Description 

Req.

 1  — 

Cover 

1

 2  — 

O-Ring 

1

  3  HAF-26 

Baffle Kit 

1

  4  HAF-6 

Filter and O-Ring Kit 

1

  5  HAF-18 

Automatic Drain (Std.) 

1

  6  HAF-8 

Plastic Bowl 

1

  7  HAF-19 

Metal Bowl Guard 

1

  8  HAF-409 

Clamp Ring 

1

  9  — 

1/2 x 3/8 Vinyl Tubing, 6 ft. 

1

  10  HAF-11 

Manual Drain (Optional, 

1

 

     

shipped loose)

PARTS LIST - Model HAF-502 

CA PROP

65

PROP 65 WARNING
WARNING: This product contains 
chemicals known to the State of 
California to cause cancer and birth 
defects or other reproductive harm.

Содержание HFRL-508

Страница 1: ...ngs couplings etc that restrict air flow 5 A 1 2 street elbow will be needed to allow vertical pipe instal lation Mount filter in a vertical position 6 Do not install filter in an application where the pressure drop will exceed 20 psi For example a quick opening valve located upstream from the filter could cause a momentary pressure drop in excess of 20 psi 7 Install T handle into regulator Model ...

Страница 2: ... into service make sure plastic bowl and metal bowl guard are properly installed and se curely locked in place 8 Confirm automatic drain operates properly after unit is in operation Replace if necessary Ind Ref Replacement Parts No Part No Description Req 1 HAF 502 Air Filter 100 CFM See Fig 2 1 2 HAF 21 Cross Manifold 1 3 GA 288 Air Gauge 0 160 psi main line 1 4 83 2727 Air Gauge 0 100 psi regula...

Страница 3: ...lly remove bottom plug 7 and clean valve seat 11 and body Clean parts with denatured alcohol wipe off seat and blow out body with compressed air 2 Todisassembleregulator removescrews bonnet springand spring button Diaphragm assembly can now be removed 3 Check all o rings for signs of damage Replace if necessary 4 Reassemble parts Center stem of valve in hole of regulator body Screw bottom plug int...

Страница 4: ...tions Region Industrial Automotive Automotive Refinishing Americas Tel 1 800 992 4657 Tel 1 800 445 3988 Fax 1 888 246 5732 Fax 1 800 445 6643 Europe Africa Middle East India Tel 44 0 1202 571 111 Fax 44 0 1202 573 488 China Tel 8621 3373 0108 Fax 8621 3373 0308 Japan Tel 81 45 785 6421 Fax 81 45 785 6517 Australia Tel 61 0 2 8525 7555 Fax 61 0 2 8525 7575 Carlisle Fluid Technologies is a global l...

Отзывы: