devireg
™
540/550 is able to use two
sensors, one built-in sensor plus an
external sensor which can be placed
in the
fl
oor.
Choose the sensor(s) which will be
used for this heating system.
Turn to choose Room Sensor
(r S)
,
Floor Sensor
(FS)
or both Room and
Floor Sensor
(rFS)
, and press ...
(If the thermostat only uses a
fl
oor
sensor, the display will not show the
actual temperature (5º to 35º), but a
scale from 0 to 10).
Always use a
fl
oor sensor when the
heating element is installed on or
beneath wooden surfaces !
14
Содержание devireg 540
