E-2
3. Hold onto the portions indicated in the illustration,
place the machine onto the paper feed cabinet.
When placing the machine, use the positioning
pins in the rear of the paper feed cabinet to align
the machine correctly with the cabinet.
Note:
• When transporting or moving the machines,
assign adequate number of persons.
• When attaching the machine, as the reference
fit the machine with the corner A and B of the
paper feed cabinet.
4. Remove the cover from the back of the machine
as shown in the illustration. (One screw)
5. Peel the tape that fixes the paper feed cabinet
hookup harness in position.
6. Connect the two connectors of the paper feed
cabinet hookup harness to the machine.
7. Reinstall the cover which has been removed in
step 4. (One screw)
A1UDIXC003DA
B
A
A1V4IXC010DA
A1V4IXE062DA
A1V4IXE063DA
A1V4IXE064DA
A1V4IXE065DA
8. Secure the paper feed cabinet to the machine by
the two supplied fixing bracket A’s.
(Two supplied screws)
9. Slide out the second and third drawers from the
paper feed cabinet.
10. Perform the following steps (1) to (4) to screw
the machine and the paper feed cabinet
together.
(1) Insert the screw into the upper hole on the
machine and temporarily tighten the screw.
(One supplied screw)
(2) Hang the supplied fixing bracket B on the
screw indicated in step (1).
(3) Align the hole of the paper feed cabinet and
the lower hole of the fixing bracket B. Insert the
screw into the holes and tighten the screw.
(One supplied screw)
(4) Completely tighten the screw indicated in step
(1).
11. Install the supplied fixing bracket C (Right) to
secure the machine and the paper feed cabinet
together. (One supplied screw)
Note:
Be careful not to damage the sheets of mylar.
12. Slide the drawers back in.
A1V4IXC014DA
A1V4IXC057DA
A1V4IXC015DA
(1)
A1V4IXC016DA
(1)
A1V4IXC017DA
A1V4IXC018DA
Mylar
