Develop ineo 4020 Скачать руководство пользователя страница 312

Страница: 312 / 365

User's Guide

- 312 -

Action

Yes

Step 4

1. Reinstall the imaging unit.

a. Remove the toner cartridge.

b. Remove the imaging unit.

Warning—Potential Damage:

Do not expose the

imaging unit to direct light for more than 10 minutes.

Extended exposure to light may cause print quality

problems.

c. Install the imaging unit, and then the cartridge.

2. Resend the print job.

Is the page or image clipped?

Contact

technical

support

The problem is solved.

Compressed images appear on prints

Note:

Printing on letter-size paper using a 220-volt fuser compresses images.

Action

Yes

Step 1

1. Make sure the size of the paper loaded in the tray matches the fuser

type.

Note:

Use a 110-volt fuser for printing on letter-size paper and a 220-

volt fuser for printing on A4-size paper.

2. Resend the print job.

Do compressed images still appear?

The problem is

solved.

Go to step 2.

Step 2

1. Replace the fuser. For more information on installing the fuser, see the

instruction sheet that came with the part.

2. Resend the print job.

Do compressed images still appear?

The problem is

solved.

Contact

technical

support

Содержание ineo 4020














































































































































































































































































































































































Результаты поиска

Содержание ineo 4020

Отзывы:

Похожие инструкции для ineo 4020

Бренды по названию

Популярные бренды

Develop ineo 4020, Руководство пользователя

Результаты поиска

Содержание ineo 4020

Отзывы:

Похожие инструкции для ineo 4020

Бренды по названию

Популярные бренды