Develop ineo 4020 Скачать руководство пользователя страница 256

Страница: 256 / 365

User's Guide

- 256 -

Note:

Dispose of the used imaging unit according to your local regulations. Do not burn the imaging unit.

Moving the printer

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two

or more trained personnel to lift it safely.

Before moving the printer

CAUTION—POTENTIAL INJURY:

Before moving the printer, follow these guidelines to avoid

personal injury or printer damage:

•

Turn the printer off using the power switch, and then unplug the power cord from the electrical outlet.

•

Disconnect all cords and cables from the printer before moving it.

•

If an optional tray is installed, then remove it from the printer. To remove the optional tray, slide the

latch on the right side of the tray toward the front of the tray until it

clicks

into place.

•

Use the handholds located on both sides of the printer to lift it.

•

Make sure your fingers are not under the printer when you set it down.

•

Before setting up the printer, make sure there is adequate clearance around it.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage:

Damage to the printer caused by improper moving is not covered by the

printer warranty.

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these

precautions:

•

Any cart used to move the printer must have a surface able to support the full footprint of the printer.

Содержание ineo 4020














































































































































































































































































































































































Результаты поиска

Содержание ineo 4020

Отзывы:

Похожие инструкции для ineo 4020

Бренды по названию

Популярные бренды

Develop ineo 4020, Руководство пользователя

Результаты поиска

Содержание ineo 4020

Отзывы:

Похожие инструкции для ineo 4020

Бренды по названию

Популярные бренды