Develop D 16G Скачать руководство пользователя страница 17

Страница: 17 / 239

G-5

PRECAUTIONS FOR USE

3-1.

To Ensure the Printer is Used in an Optimum Condition

• Never place a heavy object on the printer or subject the printer to shocks.

• Insert the power plug all the way into the outlet.

• Do not attempt to remove any panel or cover that is secured while the printer is in a print

cycle.

• Do not turn OFF the printer while it is in a print cycle.

• Provide good ventilation if the printer is to be used for a long time in a narrow room.

• Never use flammable sprays near the printer.

• If the printer becomes inordinately hot or produces abnormal noise, immediately turn it

OFF and unplug it.

• Do not turn ON the power switch at the same time that you plug the power cord into the

outlet.

• When unplugging the power cord, do not pull on the cord; hold the plug and pull it out.

• Do not bring any magnetized object near the printer.

• Do not place a vase or vessel containing water on the printer.

• Be sure to turn OFF the power switch at the end of the workday or upon power failure.

• Use care not to drop paper clips, staples, or other small pieces of metal into the printer.

3-2.

Operating Environment

The operating environmental requirements of the printer are as follows.

• Temperature: 10 to 30 °C

• Humidity: 15 to 85 %

• Rate of temperature change: 10 °C/h

• Rate of humidity change: 20 %Rh/h

3-3.

Power Requirements

The power source voltage requirements are as follows.

• Voltage fluctuation: AC110 V -10 %, AC127 V +6 % (Function)

AC220-240 V ± 10 % (Function)

AC110 V -15 %, AC127 V +6 % (Paper Feeding)

AC220-240 V +10 %, -15 % (Paper Feeding)

• Frequency fluctuation: 50/60 Hz ± 3 Hz

Содержание D 16G















































































































































































































































Результаты поиска

Содержание D 16G

Отзывы:

Похожие инструкции для D 16G

Бренды по названию

Популярные бренды

Develop D 16G, Руководство по обслуживанию

Результаты поиска

Содержание D 16G

Отзывы:

Похожие инструкции для D 16G

Бренды по названию

Популярные бренды