- 17 -
4 - Fax
Fax
This chapter describes all the fax processing and
configuration functions.
You will also find a section describing fax mailboxes.
Fax transmission
Print a header page (depending on model)
A header page is stored in your terminal. To send your fax
using this header page, you can print it at any time and fill
in your details.
1
Select
30 -
FAX /HEADER PAGE.
2
Select :
301 - LOCAL
, to print a header page according to
the country configured on the terminal,
302 - INTERNAT
, to print a bilingual header page,
the language of the country configured on the
terminal and English. The separator between the
two languages is "/".
Example of the international header page:
Immediate transmission
1
Place the document to be copied in the automatic
document feeder, face printed on the top.
or
Place the document to be copied face down on the
glass, respecting the indications around the glass.
2
Enter the fax number or choose your dialling mode
then press
.
The
icon flashes during the call phase, it stays
lit when both faxes are in communication.
3
At the end of transmission the initial screen is
displayed.
Delayed transmission
This function allows you to transmit a document at a later
time.
To program a postponed transmission you need to
identify the subscriber number, transmission time, feeder
type and number of pages.
To delay the transmission time of your document :
1
Place the document to be copied in the automatic
document feeder, face printed on the top.
or
Place the document to be copied face down on the
glass, respecting the indications around the glass.
2
Select
31 -
FAX / TRANSMISSION
.
3
Enter the subscriber number you wish to program
at a different time or choose your dialling mode and
confirm with
OK
.
4
Next to the current time, enter the new time and
confirm with
OK
.
5
Choose
B & W SCAN
or
COLOR SCAN
.
6
Adjust the contrast and confirm with
OK
.
7
Select the feed type,
FEEDER
or
MEMORY
and
confirm with
OK.
8
You may enter the number of pages before
transmission and confirm with
OK
.
9
Confirm postponed transmission by pressing
key .
Your document is stored and will be sent at the new time.
If English is the language configured on the
terminal. The header page will only be printed
in English
.
When sending in "Deferred Send" mode,
make sure that the document is located in the
right direction.