- 12 -
2 - Installation
Paper delivery stop
Adjust the paper delivery stop, depending on the format of
the document to be printed. Do not forget to raise the flap
to prevent the sheets from falling down.
Starting your device
Device connection
1
Plug the end of the telephone line into the terminal
socket and the other end into the wall telephone
socket.
2
For the model network, plug end of the LAN cord
(as provided by your network administrator) into
port of your fax machine and the other end into
your local network port dedicated to your fax
machine.
3
Make sure that the On/Off switch is on Off
(O position).
4
Connect the power cord to the device.
Plug the power cord to outlet on the wall
5
Press the On/Off button to turn on the device
(I position).
6
(*) After initialisation, "
WAITING FOR INIT CARD
"
appears on the screen. Insert the initialisation card
provided in the card reader as indicated on the
picture.
7
(*) After an analysis phase, "
INIT. OK - REMOVE
CARD
" appears on the screen. Remove the
initialisation card from the drive.
Before plugging the power cord, it is
imperative to refer to the
Security
directives
, page 1.