manualshive.com logo in svg

Develcon Electronics Orbitor 6000, Инструкция по установке и эксплуатации

Поделиться
Скачать
Develcon Electronics Orbitor 6000 Скачать руководство пользователя страница 30

Applications

2.18

 — Orbitor 6000 Installation & Applications Guide

Novell Servers in One Location Only

Some Novell LAN installations require that a remote LAN that consists of only Novell
IPX clients be connected to a central LAN that contains the Novell servers and some more
clients.  In this configuration, the Orbitor IPX router located at the remote site must be
configured with the appropriate IPX network numbers.  The IPX network number must be
configured manually because there is no Novell server at the remote site.  The Orbitor
must act as a Novell server to supply the proper IPX network number to the clients on the
remote site LAN.

In the following diagram, the Orbitor connected to LAN #2 must be configured with IPX
network number 1500 using the appropriate frame type.  The clients connected to LAN #2
must also be running with the same frame type as defined on the Orbitor.  After the
Orbitors have established the WAN connection, the IPX routing procedures will cause the
names of the services located on LAN #1 to be stored in the services table on the Orbitor
on LAN #2.  When one of the clients on LAN #2 starts up, it will look for a server on the
local LAN and the Orbitor will respond with the list of servers that are located on the
central LAN.

Figure 2-6 IPX Routed Local Area Networks (Servers on one side)

The following steps must be performed on the Orbitor connected to LAN #2.

1.

IPX Routing Disabled

Location: 

Main

 Configuration

 

IPX Routing Set up

 

IPX Routing

Disabling IPX routing allows the IPX frame types to be modified.

Содержание Orbitor 6000








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды